KeimPaintsCanada - Concretal System - Decoration and Protection

Concretal System

The long-lasting universal concrete protection and decoration system

Decoration and protection

	For aesthetic, as well as psychological reasons, a colored facade to concrete surfaces is of increasing environmental significance.To achieve an opaque, mineral matt coating more than 200 KEIM standard color shades are available.
	KEIM Concretal-Lasur in a variety of different shades creates textured, colored facades.
	Stained concrete and other surface blemishes can be optically equalized by KEIM Concretal-Lasur without altering the structure of exposed concrete surface.
	Defective concrete surfaces with hairline cracks, small blow holes or differences in structure can be equalized with a primer coat of KEIM Concretal-Grob (medium texture) or KEIM Contact-Plus.

Concretal System Products

Concretal
Ready-to-use, mineral, silicate-based protection paint with light-fast inorganic pigments, to be diluted with Concretal Dilution, available in over 200 different standard shades.

Technical Data (PDF)

Concretal Grob
Slightly equalizing, mineral, silicate based primary or bridging coat, suitable for crazed and repaired concrete surfaces. Respectively filler for KEIM Concretal-Paint. To be diluted with Concretal-Dilution, available in over 200 different standard shades.

Technical Data (PDF)

Concretal Lasur
Ready-to-use, mineral, silicate based thin layer obliterative coating or for low pigmented staining of concrete surfaces. Equalizes unacceptable variations in color and texture, protects
the concrete surface from weather and the action of airborne pollutants. To be diluted with Concretal- Dilution, available in over 200 different standard shades.

Technical Data (PDF)

Concretal AY Plus
Ready-to-use, acrylic, resin bound concrete protection paint for high carbonation protection. To be diluted with water, available in over 200 different standard shades.

Technical Data (PDF)

Concretal OS
Crack-filling, mineral based, elastic concrete protection for very high carbonation protection, grey.

Technical Data (PDF)

Concretal Grund OS
Ready-to-use, mineral based priming coat on KEIM Concretal-OS for following color applications with KEIM Concretal. Available in over 200 different standard shades.

Technical Data (PDF)

Concretal Dilution
Liquid silicate binder, used to dilute KEIM Concretal-Lasur or KEIM Concretal-Paint. May be used neat asa primer coat to reduce high surface porosity.

Technical Data (PDF)

Lotexan
Colourless siloxane based water repellent treatment for alkaline mineral substrates such
as concrete and new cementitious renders. 2 coat wet on wet 0.4 lt per square metre

Technical Data (PDF)

Lotexan N
Colourless modified siloxane based water repellent treatment for low alkalinity mineral
substrates such as weathered natural stone. 2 coat wet on wet 0.4 lt per square metre

Technical Data (PDF)

Concretal System Supplementary Products

Concretal Plus
Silicate based renovation bridging coat in white for application on old, synthetic resin bound paint layers and/or filling cracks up to 0,5 mm. It is appropriate to use this primer when cost and/or environmental pollution prevent the removal of existing paint layers.

Technical Data (PDF)

Silan-Primer
Silane based, water repellent primary coat for surfaces with high water loads in connection with KEIM Concretal.

Technical Data (PDF)

Silan-100
Silane based, solvent-free, extremely water repellent primer coat.

Technical Data (PDF)

Concretal-Repair-Mortar
Non-shrinking cementitious mortar for repairing of large concrete surfaces, layer thickness of approx. 5 mm to max. 50 mm (in serveral layers).

Technical Data (PDF)

Concretal-Filler
Concrete repair finishing mortar suitable for cracks, blow holes etc.,frost and de-icing salt resistant. Layer thickness of approx. 1 mm to max.5 mm.

Technical Data (PDF)

Concretal-Fine-Finishing-Mortar
For repairing of defective concrete surfaces (cracks, pipes, holes etc.) and restored surfaces for a layer thickness of approx. 0,5 mm to max. 2 mm in one layer, total layer thickness max. 4 mm.

Technical Data (PDF)

Concretal-Modifier
Additive to the mixing water of KEIM Concretal-Fine-Finishing-Mortar for the preparation of a blow hole slurry.

Technical Data (PDF)

Concrete-Cleaner
Cleaning concentrate to remove contamination and mould release agents from concrete surfaces.

Technical Data (PDF)

Bio-Stripper
Stripping agent for removal of film forming coatings. Biodegradable and without chlorinated hydrocarbon.

Algicid
Non-acid algicide against fungus and algae to be applied on mineral substrates.

Technical Data (PDF)

Lime-Remover
Lime remover for the removal of sinter layers or as a cleaning agent for contaminated surfaces. 1 Liter KEIM Lime-Remover must be diluted with 3 litres of water.

Technical Data (PDF)

Please download the Concretal System brochure as PDF
by clicking the image below.

If you do not already have the free Acrobat Reader you can download it by clicking the Get Reader graphic below:

Top

Home / About Keim / Projects / Contact Us

Keim products: Granital System /Concretal System /Interior Paint System /Restauro System /Universal Render

VGR - distributor of Keim products
2535 Drew Road, Mississauga
Ontario, L4T 1G1
Canada