Keim Paints Canada - Concretal System

Concretal System

The long-lasting universal concrete protection and decoration system

Advantages of KEIM Concretal-System

Safety
The KEIM Concretal-System guarantees optimal protection against carbonation. The use of KEIM Concretal-Paint does not detract from the concrete retaining other essential features such as:

Sufficient alkalinity by the silicate binding agent and therefore additional corrosion protection.
The formation of a chemical crystalline structure increases the integrity of the concrete surface.
KEIM Concretal-Paint and concrete have very comparable coefficients of expansion which eliminates differential cracking between paint and substrate.

Economical
KEIM Concretal-Paint can easily be adjusted to any particular concrete substrate due to its ease of mixing and application. KEIM Concretal-Paint offers an economical solution for large volume contracts through the optimal relation of durability, material and labor costs. The longevity of KEIM and easy revision of coatings - no expensive pretreatment - are essential arguments for the longterm economics of the KEIM Concretal System.

Environmentally harmless
The constituent elements of the KEIM Concretal¨-System for

corrosion protection
filling of holes
the protection and reinstatement of concrete surfaces

have all been developed on the principle of using as much mineral substances as possible and thereby reducing the content of organic ingredients to a minimum.

The result: Concretal protective coating is environmentally harmless in its manufacture and does not present a hazard to the user or the environment during its application and subsequent
lifespan.

Lightfast
Due to the use of inorganic pigments and the mineral binding agent, KEIM Concretal Paint is lightfast and UV-resistant throughout its lifespan. Thus fading and yellowing of the coating
does not occur. KEIM Concretal Paint and Lasur maintain the structure of the concrete. It has a mineral matt appearance like concrete and offers a wide variety of colors as well as fulfilling
a protective function.

The wide shade range of lightfast earth oxide pigments satisfy both architectural and environmental needs resulting in the harmonious use of KEIM with its surroundings.

Concretal System Products

Concretal
Ready-to-use, mineral, silicate-based protection paint with light-fast inorganic pigments, to be diluted with Concretal Dilution, available in over 200 different standard shades.

Technical Data (PDF)

Concretal Grob
Slightly equalizing, mineral, silicate based primary or bridging coat, suitable for crazed and repaired concrete surfaces. Respectively filler for KEIM Concretal-Paint. To be diluted with Concretal-Dilution, available in over 200 different standard shades.

Technical Data (PDF)

Concretal Lasur
Ready-to-use, mineral, silicate based thin layer obliterative coating or for low pigmented staining of concrete surfaces. Equalizes unacceptable variations in color and texture, protects
the concrete surface from weather and the action of airborne pollutants. To be diluted with Concretal- Dilution, available in over 200 different standard shades.

Technical Data (PDF)

Concretal AY Plus
Ready-to-use, acrylic, resin bound concrete protection paint for high carbonation protection. To be diluted with water, available in over 200 different standard shades.

Technical Data (PDF)

Concretal OS
Crack-filling, mineral based, elastic concrete protection for very high carbonation protection, grey.

Technical Data (PDF)

Concretal Grund OS
Ready-to-use, mineral based priming coat on KEIM Concretal-OS for following color applications with KEIM Concretal. Available in over 200 different standard shades.

Technical Data (PDF)

Concretal Dilution
Liquid silicate binder, used to dilute KEIM Concretal-Lasur or KEIM Concretal-Paint. May be used neat asa primer coat to reduce high surface porosity.

Technical Data (PDF)

Lotexan
Colourless siloxane based water repellent treatment for alkaline mineral substrates such
as concrete and new cementitious renders. 2 coat wet on wet 0.4 lt per square metre

Technical Data (PDF)

Lotexan N
Colourless modified siloxane based water repellent treatment for low alkalinity mineral
substrates such as weathered natural stone. 2 coat wet on wet 0.4 lt per square metre

Technical Data (PDF)

Concretal System Supplementary Products

Concretal Plus
Silicate based renovation bridging coat in white for application on old, synthetic resin bound paint layers and/or filling cracks up to 0,5 mm. It is appropriate to use this primer when cost and/or environmental pollution prevent the removal of existing paint layers.

Technical Data (PDF)

Silan-Primer
Silane based, water repellent primary coat for surfaces with high water loads in connection with KEIM Concretal.

Technical Data (PDF)

Silan-100
Silane based, solvent-free, extremely water repellent primer coat.

Technical Data (PDF)

Concretal-Repair-Mortar
Non-shrinking cementitious mortar for repairing of large concrete surfaces, layer thickness of approx. 5 mm to max. 50 mm (in serveral layers).

Technical Data (PDF)

Concretal-Filler
Concrete repair finishing mortar suitable for cracks, blow holes etc.,frost and de-icing salt resistant. Layer thickness of approx. 1 mm to max.5 mm.

Technical Data (PDF)

Concretal-Fine-Finishing-Mortar
For repairing of defective concrete surfaces (cracks, pipes, holes etc.) and restored surfaces for a layer thickness of approx. 0,5 mm to max. 2 mm in one layer, total layer thickness max. 4 mm.

Technical Data (PDF)

Concretal-Modifier
Additive to the mixing water of KEIM Concretal-Fine-Finishing-Mortar for the preparation of a blow hole slurry.

Technical Data (PDF)

Concrete-Cleaner
Cleaning concentrate to remove contamination and mould release agents from concrete surfaces.

Technical Data (PDF)

Bio-Stripper
Stripping agent for removal of film forming coatings. Biodegradable and without chlorinated hydrocarbon.

Algicid
Non-acid algicide against fungus and algae to be applied on mineral substrates.

Technical Data (PDF)

Lime-Remover
Lime remover for the removal of sinter layers or as a cleaning agent for contaminated surfaces. 1 Liter KEIM Lime-Remover must be diluted with 3 litres of water.

Technical Data (PDF)

Please download the Concretal System brochure as PDF
by clicking the image below.

If you do not already have the free Acrobat Reader you can download it by clicking the Get Reader graphic below:

Top

Home / About Keim / Projects / Contact Us

Keim products: Granital System /Concretal System /Interior Paint System /Restauro System /Universal Render

VGR - distributor of Keim products
2535 Drew Road, Mississauga
Ontario, L4T 1G1
Canada